Female thread ball valve has three parts, a valve body and two end caps. They are welded, threaded or flanged to the pipe ends. Quarter-turn design handle can be rotated 90 degrees to open or close the valve. The locking device is used as a locking mechanism on the handle to prevent turning when the handle is locked in the open or closed position. It helps avoid line shut-off during system maintenance and acts as a divider between the valve connection port and the valve body. Full-bore ball valves refer to ball valves with the same diameter as the inner diameter of the pipe. Three piece ball valve available material is stainless steel SS316 with PTFE seal.
Product Details
3-Piece Threaded End Ball Valve: Is a ball valve used to allow or stop fluid flow in a piping system. It is designed with a full bore and has a quarter-turn handle. The handle can be rotated 90 degrees to set the valve in the open or closed position. The locking mechanism on on is to prevent accidental turning of the handle when it is in the open or closed positie.
Driedelig schroefdraad einde aansluiting kogel kleppen - een door - prik - schroefdraad - - in een schroefdraad en het aandraaien van moeren 7 d% schroefdraad einde verbindingen .en bouten zonder verwijderen de eind aansluitingen. Het is gemaakt van RV staal RVS316 materiaal met PTFE afdichting materiaal.
Three-piece socket welded ball valve: It is a valve used to start or stop the flow of fluid in the pipeline system. It features a full bore design and a quarter-turn handle. The handle can be rotated 90 degrees to open or close the valve. The locking device on the handle is used as a locking mechanism to ensure that the valve is only in the open position or only in the closed position.
De drie-delig socket las kogel klep bestaat uit van twee stukken van socket lassen end aansluitingen en een klep body. De klep body is connected door twee socket lassen ends and assembled by bolts and nuts. The 2 piece socket weld end connection will be attached to the body before it is assembled to the plain end type pipe end. The body can be removed for cleaning without removing the 2 welded end connections. This ball klep is gemaakt van roestvrij staal SS316 materiaal en PTFE afdichting materiaal.
Onderdelen
| Nee. | Deel | |
| 1 | Cast ijzer | |
| 2 | Motorkap | Cast ijzer |
| 3 | Schijf | Gegoten ijzer plus messing |
| 4 | Stengel | carbon staal |
| 5 | Pakking | zacht grafiet |
| 6 | Hand Wiel | Cast ijzer |
Tekening
De vrouw draad kogel klep is a vol boring klep installatie op een pijpleiding to allow or block fluid flow. It bestaat uit 3 stuks, 2 pieces met butt welding aansluiting uiteinden and klep body. De twee componenten met butt well end aansluitingen zijn geassembleerd naar de klep body met bouten en moeren. The 2-piece butt well end connection needs to be connected to the butt weld pipe end end before aansluiten op de body. De klep body can be gedemonteerd voor onderhoud zonder demontage de gelaste aansluitingen. It features RV steel SS316 materiaal en PTFE zitting.
Dimensies
| DN | L | D | D1 | Z-∅d | H |
| 40 | 165 | 130 | 110 | 4-18 | 280 |
| 50 | 180 | 160 | 125 | 4-18 | 300 |
| 65 | 195 | 180 | 145 | 4-18 | 330 |
| 80 | 210 | 195 | 160 | 4-18 | 350 |
| 100 | 230 | 215 | 180 | 8-18 | 400 |
| 125 | 255 | 245 | 210 | 8-18 | 470 |
| 150 | 280 | 280 | 240 | 8-23 | 500 |
| 200 | 330 | 335 | 295 | 8-23 | 620 |
| 250 | 380 | 390 | 350 | 12-23 | 690 |
| 300 | 420 | 440 | 400 | 12-23 | 800 |
| 350 | 450 | 500 | 460 | 16-23 | 950 |
| 400 | 480 | 565 | 515 | 16-25 | 1050 |
| 450 | 510 | 610 | 565 | 20-25 | 1130 |
| 500 | 540 | 670 | 620 | 20-25 | 1390 |
| 600 | 600 | 780 | 725 | 20-30 | 1610 |
| 700 | 660 | 895 | 840 | 24-30 | 1950 |
| 800 | 720 | 1010 | 950 | 24-34 | 2170 |
Populaire tags: female thread ball valve% 2c China female thread ball valve leveranciers